Designed and built by Forney. Our International Series Compression Machines are ideal for the testing lab because of their versatility and multi-language touchscreen interface. These Testing Machines have frames manufactured from solid steel into a one-piece, welded unit that exceeds ASTM, ACI, BS, EN and other international standards. All machines in the series have Lexan fragment guard doors for enhanced safety.
Our International Series Machines are backed by our International Sales & Service Team as well as a network of local Forney Certified Service providers.
GET A QUOTEDownload the Spec Sheet
DownloadLoad Capacity
1500KN
Frame
Standard (F)
Control System
Manual
Test Types
Compression, Flexural, Tensile Splitting
Testing Materials
Cylinders, Cubes, Grout Prism, Beams, Masonry Blocks, Rock Core
Accessories
Cylinder Compression (6" Dia x 12" L with Pad Caps) (150mm x 300mm)
TA-0101 Cylinder Top Platen Assembly (included w/ machine)
TM-0095 Bottom Platen (included w/ machine)
TM-2035 Centering Stud (included w/ machine)
Cylinder Compression (6" Dia x 12" L with Capping Compound or Ground Ends) (150mm x 300mm)
TA-0101 Cylinder Top Platen Assembly (included w/ machine)
TA-0151 Bottom Platen
TM-2035 Centering Stud
Cylinder Compression (4" Dia x 8" L with Pad Caps) (100mm x 200mm)
TA-0101 Cylinder Top Platen Assembly (included w/ machine)
TM-0095 Bottom Platen (included w/ machine)
TM-2035 Centering Stud (included w/ machine)
TA-0173 Spacer, 4" H
TM-2035 Centering Stud
Cylinder Compression (4" Dia x 8" L with Capping Compound or Ground Ends) (100mm x 200mm)
TA-0101 Cylinder Top Platen Assembly (included w/ machine)
TA-0151 Bottom Platen
TA-0173 Spacer, 4" H
(2) TM-2035 Centering Stud
Cylinder Tensile Splitting (6" Dia x 12" L) (150mm x 300mm)
TAG-0023 Cylinder Splitting Kit
Cylinder Tensile Splitting (4" Dia x 8" L) (100mm x 200mm)
TA-0107-01 Cylinder Splitting Accessory
TM-0074 Bottom Platen
TA-0171 Spacer, 2" H
(2) TM-2035 Centering Stud
Cube (2") (50mm)
TAG-0017 Cube (2") Accessory Kit
Cube (6") (150mm)
TAG-0025 Cube (6") Accessory Kit
Flexural Beam (6" x 6" x 18") (150mm x 150mm x 450mm)
TA-0166 Flexural Testing Accessory
Masonry Block (8" or 12" W x 8" H x 16" L) (200mm or 300mm W x 200mm H x 400mm L)
TAG-0019 Block Testing Kit
* 8" x 8" x 16" NOT TO ASTM SPEC
Grout Prism (3" x 3" x 6") (75mm x 75mm x 150mm)
TA-0101 Cylinder Top Platen Assembly (included w/ machine)
TA-0151 Bottom Platen
TA-0174 Spacer, 6" H
(2) TM-2035 Centering Stud
Factory Installed Options
Voltage
110/220VAC Single Phase
Capacity Options
Dual Range (2 transducers) on Single Frame (2R)
Frame Options
Second Frame Capability (AB)
Dual Frame Capability (adds 250k de-rated frame to machine) (2F)
Dual Frame Capability (adds 30k frame setup for Concrete Beam) (BT)
Travel Limit Switch
Optional Equipment - TA-1237-07
Specifications
Load Capacity Range
15kN - 1,500kN
Vertical Opening
19.25"
Horizontal Opening
9.5"
Ram Diameter
6.75"
Piston Stroke
2.5"
Platen Hardness
60 HRC
Lower Platen Dimension
6.5" Diameter
Upper Platen Dimension
6.5" Diameter
Oil Reservoir Capacity
2 Gallons
Overall Width
33"
Overall Depth
17"
Overall Height
58"
Unit Weight
720lbs
Test Standard Ready
ASTM C39 Cylinders in Compression (6" diameter x 12" length, pad cap tesing)
ASTM E4
Test Standard Capable
ASTM C39, C78, C293, C109, C496, C1019
AASHTO T 22, T 97, T 106
BS 1610, BS 1881, EN ISO7500-1, EN 12390-3, EN 12390-4
Enter your email below to subscribe for updated news on Forney products and solutions.