Designed and built by Forney. The 602 Block Compression Testing Machine can test 2-Block in Prism as well as testing cylinders, beams, cubes, masonry products, and rock specimens. As part of Forney’s Premium “FHS” Series, the machine features a high stiffness frame and fully enclosed test chamber that is especially suited for high testing volumes and high strength concrete testing. FHS Testing Machines frames are manufactured from solid steel into a one-piece, welded unit that exceeds ACI recommendations.
GET A QUOTEDownload the Spec Sheet
DownloadLoad Capacity
600,000lb
Frame
High Stiffness (FHS)
Control System
VFD
Test Types
Compression, Flexural, Tensile Splitting
Testing Materials
Cylinders, Cubes, Grout Prism, Beams, Masonry Blocks, Masonry Prism, Rock Core
Accessories
Cylinder Compression (6" Dia x 12" L with Pad Caps) (150mm x 300mm)
TA-0103-01 Cylinder Top Platen Assembly, No Holding Stem
TA-0204-02 Draw Rod Spacer, 4" H
TM-3300-16 Draw Rod
Cylinder Compression (6" Dia x 12" L with Capping Compound or Ground Ends) (150mm x 300mm)
TA-0103-01 Cylinder Top Platen Assembly, No Holding Stem
TA-0204-02 Draw Rod Spacer, 4" H
TM-3300-16 Draw Rod
TM-0095 Bottom Platen
Cylinder Compression (4" Dia x 8" L with Pad Caps) (100mm x 200mm)
TA-0103-01 Cylinder Top Platen Assembly, No Holding Stem
TA-0204-01 Draw Rod Spacer, 8" H
TM-3300-16 Draw Rod
Cylinder Compression (4" Dia x 8" L with Capping Compound or Ground Ends) (100mm x 200mm)
TA-0103-01 Cylinder Top Platen Assembly, No Holding Stem
TA-0204-01 Draw Rod Spacer, 8" H
TM-3300-16 Draw Rod
TM-0095 Bottom Platen
Cylinder Tensile Splitting (6" Dia x 12" L) (150mm x 300mm)
TA-0107-06 Cylinder Splitting Accessory
TA-0204-02 Draw Rod Spacer, 4" H
TM-3300-16 Draw Rod
Cylinder Tensile Splitting (4" Dia x 8" L) (100mm x 200mm)
TA-0107-06 Cylinder Splitting Accessory
TA-0204-02 Draw Rod Spacer, 4" H
TA-0178-02 Draw Rod Spacer, 2" H
TM-3300-16 Draw Rod
Cube (2") (50mm)
TAG-0002 Cube (2") Accessory Kit
TM-3300-16 Draw Rod
TA-0204-02 Draw Rod Spacer, 4" H
Cube (6") (150mm)
TA-0109 Cube Top Platen Assembly
TA-0204-01 Draw Rod Spacer, 8" H
TA-0204-03 Draw Rod Spacer, 3" H
TM-3300-16 Draw Rod
Flexural Beam (6" x 6" x 18") (150mm x 150mm x 450mm)
TA-0204-02 Draw Rod Spacer, 4" H
TM-3300-16 Draw Rod
TA-0166 Flexural Testing Accessory
Masonry Block (8" or 12" W x 8" H x 16" L) (200mm or 300mm W x 200mm H x 400mm L)
TA-0113-09 Top Block Platen Accessory
TA-0204-01 Draw Rod Spacer, 8"
TM-3300-16 Draw Rod
TA-0158-25 Carrier Bracket
Block in Prism (2 block) (8" or 12" W x 16" H x 16" L) (200mm or 300mm W x 200mm H x 400mm L)
TA-0113-09 Top Block Platen Accessory
TM-3300-16 Draw Rod
TA-0158-25 Carrier Bracket
Grout Prism (3" x 3" x 6") (75mm x 75mm x 150mm)
TA-0103-01 Cylinder Top Platen Assembly, No Holding Stem
TA-0204-01 Draw Rod Spacer, 8" H
TA-0178-02 Draw Rod Spacer, 2" H
TM-3300-16 Draw Rod
TM-0095 Bottom Platen
MOE (6" diameter) (150mm)
LA-0488-E6-SG Compressometer
*Must have compression accessories
*Must have -M or -MP machine
MOE (4" diameter) (100mm)
LA-0488-E4-SG Compressometer
*Must have compression accessories
*Must have -M or -MP machine
MOE & Poisson's Ratio (6" Diameter) (150mm)
LA-0488-P6-SG Compressometer/Extensometer
*Must have compression accessories
*Must have -MP machine
MOE & Poisson's Ratio (4" Diameter) (100mm)
LA-0488-P4-SG Compressometer/Extensometer
*Must have compression accessories
*Must have -MP machine
MOE & Poisson's Ratio (2" Diameter) (50mm)
TA-3542-03 Axial Extensometer 2"
TA-3975-01 Diametral 0.030"
*Must have compression accessories
*Must have -MP machine
Factory Installed Options
Voltage
110/220VAC Single Phase
Displacement
Available Upgrade
Optional Test Protocol Capabilities
ASTM C469 MOE (M)
ASTM C469 MOE & Poisson's Ratio (MP)
ISO 13503-2 Proppant (SW-0010)
*Additional accessories required
*Inquire about other test types
Capacity Options
Dual Range (2 transducers) on Single Frame (2R)
Frame Options
Second Frame Capability (AB)
Dual Frame Capability (adds 250k de-rated frame to machine) (2F)
Dual Frame Capability (adds 30k frame setup for Concrete Beam) (BT)
Travel Limit Switch
Standard Equipment
Specifications
Load Capacity Range
6,000lbf - 600,000lbf
Vertical Opening
23.875"
Horizontal Opening
14"
Ram Diameter
9"
Piston Stroke
2.5"
Platen Hardness
60 HRC
Lower Platen Dimension
12.25" x 16.25"
Upper Platen Dimension
*See Available Accessories
Oil Reservoir Capacity
2 Gallons
Overall Width
35"
Overall Depth
23"
Overall Height
66"
Unit Weight
2,200lbs
Test Standard Ready
ASTM E4
Test Standard Capable
ASTM C39, C78, C140, C293, C109, C469, C496, C1019, C1314, D7012
AASHTO T 22, T 97, T 106
BS 1610, BS 1881, EN ISO7500-1, EN 12390-3, EN 12390-4, EN 772-1
Enter your email below to subscribe for updated news on Forney products and solutions.